prijímač AV signálu cez optický kábel, 10km dosah.

Prenos signálu po optike je zabezpečený optickým prijímačom FA201 a vysielačom AF201. Prenos signálu cez optický kábel do 10km, pre kompletný prenos AV signálu, digitalizácia 10-bit pre video, 20-bit audio, zabudovaný generátor pruhov, a 2 kanálový audiotest 1 a 2KHz.


Optical
Optical fiber interconnection between transmitter and receiver -1 singlemode (SM) cabl, SC connector
Wavelength: 1310 nm(1550nm)
Operating distance 10 km with singlemode (SM) cables with a FA-201AV,AF-201AV
NOTE- Operating distance is approximate.
Transmission power -7 dBm, typical
Maximum receiver sensitivity -18 dBm, typical

Video
Standards
Input PAL, SECAM, autodetected
Output PAL (follows vertical rate)
Decoder type Adaptive 2D, digital comb filter

Video input — transmitters:
Number/signal type - component (Y, Pr, Pb), S-video, composite video
connectors 1 x 3 BNC Nominal level -1.0 Vp-p for Y of component video and S-video, and for composite video 0,525 Vp-p for Pr, Pb of component video 0.3 Vp-p for C of S-video
Impedance 75 ohm
Input coupling AC
Video output — receivers
Number/signal type 1 component (Y, Pr, Pb) video, S-video, composite video
Connectors 1 x 3 BNC Nominal level -1.0 Vp-p for Y of component video and S-video, and for composite video 0,525 Vp-p for Pr, Pb of component video 0.3 Vp-p for C of S-video

Audio
Frequency response 20 Hz to 20 kHz, ±0.5 dB
Audio bits per sample 20 bits per channel, 2 channels (L, R)
Sampling rate 48 kHz

Audio input — transmitter
Number/signal type 1 stereo, balanced or 2 mono, unbalanced.
Connectors 5 mm screw connector, 3 pole
Impedance 100Kohms balanced, DC coupled
Nominal level +4 dBu (1.23 Vrms)
NOTE 0 dBu = 0.775 Vrms

Audio output — receiver
Number/signal type 1 stereo, balanced or 2 mono unbalanced.
Connectors 5 mm screw connector, 3 pole
Nominal level +4 dBu (47Kohm),

Power input requirements 12 VDC, 1 A
Enclosure type - metal(aluminium )
Enclosure dimensions (4 cm H x 11 cm W x 15 cm D)